Nanao MS9 - 29" Differences
- theMot
- Posts: 67
- Joined: May 24th, 2013, 12:59 am
- Location: Sydney, Australia
Nanao MS9 - 29" Differences
Hi Guys, Just wondering is there any differences in terms of compatibility between the different Nanao MS9's? I might be able to pick up a spare one for my Egret II and they came with the MS9-29T from what I gather but will the others work with it too? Tube is Toshiba.
- monouchi
- Polishing his shaft
- Posts: 1124
- Joined: February 21st, 2010, 6:16 pm
- Location: Sweden
- eBay: monouchi_jn
- Initials: BUS
Re: Nanao MS9 - 29" Differences
Ms9 Toshiba tubes fits the E2, what model number do you have on the tube?
- theMot
- Posts: 67
- Joined: May 24th, 2013, 12:59 am
- Location: Sydney, Australia
Re: Nanao MS9 - 29" Differences
Hi Mono,
The Toshiba tube is what i have. I have spoken to jomac regarding this and he says the difference is basically a relay for switching between 15 and 24 res. I have confirmed the Nanao on offer is the 29T anyway so im good to go.
The Toshiba tube is what i have. I have spoken to jomac regarding this and he says the difference is basically a relay for switching between 15 and 24 res. I have confirmed the Nanao on offer is the 29T anyway so im good to go.
- Wurstkopp
- Mister Dick Statue
- Posts: 744
- Joined: March 26th, 2009, 6:50 pm
- Location: Hamburg, Germany
- eBay: nachmittagsprogramm
- Initials: NIK
Re: Nanao MS9 - 29" Differences
MS9-29T is the Taito chassis with auto-degauss, MS9-29A is the Astro City chassis with manual degauss; they're pretty much the same chassis. There's a third model using a Hitachi tube, the MS9-29SU (imo it stand for Sega Universal, since it was built in various Sega cabinets). The yoke specs of the Hitachi tube are slightly different than the specs from the Toshiba tube, but I think they're all kinda interchangeable.
- theMot
- Posts: 67
- Joined: May 24th, 2013, 12:59 am
- Location: Sydney, Australia
Re: Nanao MS9 - 29" Differences
Hi Wurstkopp, are you sure about that? What about other dedicated 29" cabs that had these chassis? Pretty sure Time crises for example had them.
- monouchi
- Polishing his shaft
- Posts: 1124
- Joined: February 21st, 2010, 6:16 pm
- Location: Sweden
- eBay: monouchi_jn
- Initials: BUS
Re: Nanao MS9 - 29" Differences
Yes, if it is a 29T, then you are set, congratulations.
The Hitachi tube wont fit in an E2 rot mech. (though i have a set of custom built monitor arms that would make it fit.)
I also have a Hitachi yoke and it has the same values as the Toshiba one.
I have also tried A,S and N Ms9 chassis on a T tube and they all worked perfectly, with minor geo adjustments to be done of course.
The Hitachi tube wont fit in an E2 rot mech. (though i have a set of custom built monitor arms that would make it fit.)
I also have a Hitachi yoke and it has the same values as the Toshiba one.
I have also tried A,S and N Ms9 chassis on a T tube and they all worked perfectly, with minor geo adjustments to be done of course.
- zak
- Acetated
- Posts: 1633
- Joined: October 19th, 2014, 1:35 pm
- Location: UK
- eBay: NA
Re: Nanao MS9 - 29" Differences
Hi Mono
So the MS9-29SU won't fit in the Egret II?
So the MS9-29SU won't fit in the Egret II?
- monouchi
- Polishing his shaft
- Posts: 1124
- Joined: February 21st, 2010, 6:16 pm
- Location: Sweden
- eBay: monouchi_jn
- Initials: BUS
Re: Nanao MS9 - 29" Differences
Hi,zak wrote:Hi Mono
So the MS9-29SU won't fit in the Egret II?
If it has the Hitachi tube, then no.
- zak
- Acetated
- Posts: 1633
- Joined: October 19th, 2014, 1:35 pm
- Location: UK
- eBay: NA
Re: Nanao MS9 - 29" Differences
One last question
I've been offered a Toshiba tube with MS9-29U chassis. Will this fit an Egret 2?
I've been offered a Toshiba tube with MS9-29U chassis. Will this fit an Egret 2?
- Radiant
- Posts: 13
- Joined: August 19th, 2016, 7:59 am
- Location: Austria
Re: Nanao MS9 - 29" Differences
ok an other question
will a MS9-29A with a Hitachi A68KSA30X tube fit in an Egret2?
will a MS9-29A with a Hitachi A68KSA30X tube fit in an Egret2?
- zak
- Acetated
- Posts: 1633
- Joined: October 19th, 2014, 1:35 pm
- Location: UK
- eBay: NA
Re: Nanao MS9 - 29" Differences
I don't think so. Look for this Toshiba tube: A68KJU96XRadiant wrote:ok an other question
will a MS9-29A with a Hitachi A68KSA30X tube fit in an Egret2?
I think some Samsung might fit, but not sure which model number.
- Radiant
- Posts: 13
- Joined: August 19th, 2016, 7:59 am
- Location: Austria
Re: Nanao MS9 - 29" Differences
ok thanks
i just found this Monitor near my Location and i always wanted a spare moni for my E2
i just found this Monitor near my Location and i always wanted a spare moni for my E2
-
- Please Continue...
- Posts: 53
- Joined: December 18th, 2013, 12:17 am
- Location:
Re: Nanao MS9 - 29" Differences
The Hitachi tube out of a Capcom Impress will fit in the EGRET 2 and will work with the MS9 chassis . I will check the tube number later today and post it.
- monouchi
- Polishing his shaft
- Posts: 1124
- Joined: February 21st, 2010, 6:16 pm
- Location: Sweden
- eBay: monouchi_jn
- Initials: BUS
Re: Nanao MS9 - 29" Differences
Hm, I thought the Hitachi tube didnt fit the E2 rot mech?
-
- Please Continue...
- Posts: 53
- Joined: December 18th, 2013, 12:17 am
- Location:
Re: Nanao MS9 - 29" Differences
Fits fine. I have a burn free Hitachi tube and it fit perfectly in my E2.monouchi wrote:Hm, I thought the Hitachi tube didnt fit the E2 rot mech?
- scogon
- Please Continue...
- Posts: 87
- Joined: September 15th, 2008, 1:40 pm
- Location: Ottawa, Canada
Re: Nanao MS9 - 29" Differences
Would a toshiba tube from an ms9-29s monitor work with an ms9-29su chassis?
- Wurstkopp
- Mister Dick Statue
- Posts: 744
- Joined: March 26th, 2009, 6:50 pm
- Location: Hamburg, Germany
- eBay: nachmittagsprogramm
- Initials: NIK
- scogon
- Please Continue...
- Posts: 87
- Joined: September 15th, 2008, 1:40 pm
- Location: Ottawa, Canada
Re: Nanao MS9 - 29" Differences
Fantastic!!Wurstkopp wrote:Yes.
-
- Please Continue...
- Posts: 8
- Joined: February 28th, 2018, 1:41 am
- Location: Missouri USA
- eBay: snowblindz
- Initials: BC
Re: Nanao MS9 - 29" Differences
I have a Toshiba A69KJU96X tube... just making double sure, will the Nanoa MS9-29SU be plug and play? This will be going in a Konami Windy cabinet.