Page 1 of 1

[FS] NOS Sega Driver Parts & More..

Posted: February 13th, 2017, 9:26 am
by outrun2
Prices do not include delivery which will be at cost - we can agree this before any commitment undertaken. Overseas buyers welcome :) Paypal preferred, but please add 4%/pay fees or use gift option. Collection welcome, and you'll get a few free games of OutRun2SP, initialD, Daytona USA 2 and F355 Challenge 2 in the bargain! 8-)

I don't sell on eBay, but have 100% positive feedback from numerous deals on here.


initial D steering wheel (NOS): £30
NEW initialD wheel as used on versions 1, 2 and 3 of the game. Unused, but a couple of small blemishes from storage (pictured).

Nice feel and no chunks missing.

Part number: 601-11097
Image

Image

Image



initialD/OutRun2 'up/down' gear shifter: £35 SOLD
Used gear shifter as fitted on initialD, OutRun2 etc. Nice condition, still quite tight and no real scratching on plate. Fits initialD and Model2/Model3 dashes but note that you will need a converter plate if your dash already has a 4 way shifter (Scud/Daytona/Rally) - I can provide these. Can also be used on games like Crazy Taxi/Jambo Safari.

Part number: 610-0408-91
Image



Model 3 steering wheel SEGA emblem (NOS) : £20 SOLD
NEW wheel insert with SEGA logo as used on Model 3 drivers such as Scud Race, Sega Rally 2 and Daytona 2. Fits all Model 3 type (Ketz) steering wheels (not the older Model 2 Daytona/Sega Rally wheels). Can provide nice new cap screws as well if required.

Part number: SPG-2002
Image



OutRun2/F355 steering wheel Ferrari emblem (NOS): £20
Brand new steering wheel insert with Ferrari prancing horse. Fits all Model 3 type (Ketz) steering wheels (not the older Model 2 Daytona/Sega Rally wheels). Can provide nice new cap screws as well if required.

Part number: FRI-2002
Image
Image



Sega sitdown driver gear shift cover plastics (NOS): £25
These plastics fit around the gear shifter on Sega sitdown driver dash panels. The upper plastic (INY-1204) is only suitable for the sequential up/down shifter as found on OutRun2/Dirt Devils/Indy 500/ECA while the lower plastic (DYN-1223X) is suitable for all Model2/3 dash panels including OutRun2/SP/F355 etc. (not initialD series). Can include a set of NOS tamperproof screws to finish things off properly

Part numbers: INY-1204 (upper) | DYN-1223X (lower)
Image
Image



Sega Rally 2 ROM board: £60
Tested, fully working Rally 2 ROM board. No need for security board on these so plug and play on your Model 3 Step 2.x stack.

Also have The Lost World and Daytona 2 ROM boards (without sec bd).

Part number: 834-13374
Image



NOS Sega Model 3 style dash plastic: £75 SOLD
Don't see these very often - brand new unused and unmarked Model 3 style dash plastic. Replace your scratched and fag burned dash plastic with a nice minty fresh one. Perfect for single cab and if you want to apply a superior Japanese dash decal as it even has the credit button hole blanker still intact! Just remove meter panel, dial plastics and VR panel from your existing dash plastic and mount on this new one. Suitable for most Model 3 style driving games such as Daytona 2/Rally 2/Scud Race, plus OutRun2/SP/F355. Not suitable for older Model 2 style dash used on the likes of Daytona USA/Sega Rally/Sega Touring Car.

Image

Image

Image




Model 3 complete dash assembly: £85 £80 SOLD
From a Sega Rally 2 cab - tested working. Complete with nice condition Ketz steering wheel, Sega emblem, 2 button start/view panel assembly and motor so just plug and play (even has fan still attached). Has a Sega Rally 1 shifter at the moment, but I can change this for a Ketz shifter if required.

If you're converting an initialD or Club Kart sitdown to OutRun2 then this will slot right in but you will need to replace the shifter with the sequential type (and fit converter bracket) if you want to use manual transmission (see below). Condition overall is pretty decent but the dash plastic has some scratches/fag burns and some strange glue stuff on the top. There is some usual surface rust on the rear metal frame (should clean up ok and not visible once fitted anyway).

Image

Image



Model 3 Ketz steering wheel: £45 SOLD
Nice condition Model 3 Ketz steering wheel as used on most Model 3 driver cabs, plus OutRun2.

No nasty scratches or chunks missing.

Part number: SPG-2001
Image



initialD/OutRun2 sound amp board: £30 SOLD
Standard 2 channel sound amp board as used in numerous Sega games. Can run an additional sub-woofer (under the seat generally) with correct sub and low pass amp kit, which I also have. Clean, tested and fully working.

Part number: 838-13578
Image

Re: [FS] NOS Sega Driver Parts & More..

Posted: February 13th, 2017, 9:28 am
by corn
PM for new dash plastic!

Re: [FS] NOS Sega Driver Parts & More..

Posted: February 15th, 2017, 12:08 pm
by outrun2
Dash plastic sold.

Re: [FS] NOS Sega Driver Parts & More..

Posted: February 26th, 2017, 10:36 am
by Fenneys
Hi,

Do you still have the Ketz wheel for sale and the centre emblem?

Re: [FS] NOS Sega Driver Parts & More..

Posted: March 7th, 2017, 12:36 pm
by tonysnk
Interested at:

- NOS Sega sitdown driver gear shift cover plastics: £25
(Can include a set of NOS tamperproof screws to finish things off properly)
Part numbers: INY-1204 (upper) | DYN-1223X (lower)

- initialD/OutRun2 sound amp board: £30
Part number: 838-13578

....and if you have found the sec bds, I'll take one scud race rom bd (but only if you've found the sec bd)

thx
Antonio

Re: [FS] NOS Sega Driver Parts & More..

Posted: April 5th, 2017, 6:48 pm
by outrun2
initialD wheel, up/down shifter and SEGA wheel emblem added..

Re: [FS] NOS Sega Driver Parts & More..

Posted: April 13th, 2017, 6:23 pm
by Jafaisevoi
I take the initialD shifter.
Please send me a PM with the price including shipment in Italy.
Thanks

Re: [FS] NOS Sega Driver Parts & More..

Posted: April 14th, 2017, 12:02 am
by tinchen3112
i take the Model 3 steering wheel SEGA emblem (NOS) : £20

Re: [FS] NOS Sega Driver Parts & More..

Posted: April 14th, 2017, 3:38 pm
by outrun2
PMs to both :)

Re: [FS] NOS Sega Driver Parts & More..

Posted: April 19th, 2017, 2:38 pm
by outrun2
SEGA wheel emblem sold.

Heard nothing back from guy interested in initialD shifter so this is still available.

Re: [FS] NOS Sega Driver Parts & More..

Posted: April 20th, 2017, 3:50 pm
by Jafaisevoi
Sorry, I completely forgot it due to Easter :shifty:
I write you a pm reply

Re: [FS] NOS Sega Driver Parts & More..

Posted: April 22nd, 2017, 1:10 am
by VIDEOTRONICS
any more model 3 complete dash

Re: [FS] NOS Sega Driver Parts & More..

Posted: April 25th, 2017, 2:20 pm
by outrun2
VIDEOTRONICS wrote:any more model 3 complete dash


I have one with a paddle shifter but it has a slightly damaged dash plastic. I might be able to replace the paddle shifter with a normal up/down shifter if required.

I'd prefer collection though, as it's getting hard work and costly shipping these complete panels - I'd prefer collection or may have to add the cost of a box/packing which I've covered in the past.

Re: [FS] NOS Sega Driver Parts & More..

Posted: April 25th, 2017, 2:48 pm
by VIDEOTRONICS
hi

pricer plus shipping?

i think ive got 5 units from someone on jamma plus

Re: [FS] NOS Sega Driver Parts & More..

Posted: April 25th, 2017, 3:00 pm
by outrun2
I'll check condition, shipping price and get back to you.

Do you want with or without paddle shifter?

Re: [FS] NOS Sega Driver Parts & More..

Posted: April 25th, 2017, 8:14 pm
by VIDEOTRONICS
guess shifter not matter as for or2 sp

whats price diff?