Hello there !
I am new here, but would be glad if somebody could help me out.
I recently acquired an Afterburner Climax DLX from our Local Cinema cause they were downsizing.
Sadly i ran into a problem i just can´t solve.
The System boots thru until Cabinet Initializing (for about a Minute or so) and gives a Motor Drive BD Communication Error ABS01.
I checked and rechecked all connections for several times and couldn´t find a Solution. Thing is when i turn off Movement in the Service / Testmenu the Game boots thru without issues.
Since i couldn´t find a Manual or Service Manual for the Afterburner Climax DLX anywhere i am tapping in the Dark. So i really would appreciate any help.
I added a photo gallery hope that isn´t against the rules:
https://goo.gl/photos/vtMtdQnkBZHehAnN7
Cheers from Austria
Ronald
Afterburner Climax DLX, Motor Drive BD Communication Error ABS01
-
- Please Continue...
- Posts: 11
- Joined: March 26th, 2017, 11:44 pm
- Location: Austria
- Contact:
-
- Please Continue...
- Posts: 11
- Joined: March 26th, 2017, 11:44 pm
- Location: Austria
- Contact:
Re: Afterburner Climax DLX, Motor Drive BD Communication Error ABS01
@everyone
I contacted Sega today and they were very helpful with an diagnostic guide.
Sadly the Board which powers the Servo Motors is dead.
And the Board was not produced by Sega, it was from Simuline specifically for the Afterburner Climax SDLX.
Yet Sega doesn´t have spare Boards anymore and Simuline seem to have ended Support for the Board a while ago.
So it seems i am stuck..
Cheers
Ronald
I contacted Sega today and they were very helpful with an diagnostic guide.
Sadly the Board which powers the Servo Motors is dead.
And the Board was not produced by Sega, it was from Simuline specifically for the Afterburner Climax SDLX.
Yet Sega doesn´t have spare Boards anymore and Simuline seem to have ended Support for the Board a while ago.
So it seems i am stuck..
Cheers
Ronald
-
- Please Continue...
- Posts: 11
- Joined: March 26th, 2017, 11:44 pm
- Location: Austria
- Contact:
Re: Afterburner Climax DLX, Motor Drive BD Communication Error ABS01
Follow up, i was able to get a newer Revision MotionBoard booting with the Real Time Linux.
But i think some files on the Compact Flash Card on the Motionboard were corrupted since it gets stuck at some point.
Does anybody own an SDLX , really need a copy of the CF Card desperately. (Must not be for free.. i am willing to pay for a copy)
Any help is as always appreciated
Thanks
Ronald
But i think some files on the Compact Flash Card on the Motionboard were corrupted since it gets stuck at some point.
Does anybody own an SDLX , really need a copy of the CF Card desperately. (Must not be for free.. i am willing to pay for a copy)
Any help is as always appreciated
Thanks
Ronald
-
- Please Continue...
- Posts: 1
- Joined: August 15th, 2017, 8:11 am
- Location: USA
Re: Afterburner Climax DLX, Motor Drive BD Communication Error ABS01
Did you ever solve this? I have 2 Afterburner cabinets with the same error. When you said motor driver board which board are you referring to? The PC104 stack near the Lindbergh computer or the actual motor driver board near the linear actuators?
I can help you with the files.
I can help you with the files.