Hi, I have System 369 with Tekken Tag 2 and Tekken 6 controls with a connector shown below
What boards/adapters do I need connect such controls to the system?
I also found this diagram:
If I understand correctly, according to it, I need only IO Board, however all Namco IO boards that I saw doesn't have such connector.
So I guess something else is needed.
NAMCO System 369 controls
-
- Please Continue...
- Posts: 4
- Joined: March 26th, 2017, 4:00 pm
- Location: planet earth
- FoxhoundOh
- Please Continue...
- Posts: 11
- Joined: March 1st, 2017, 9:02 pm
- Location: Texas
- Initials: FOX
Re: NAMCO System 369 controls
That's a 12 pin wiring harness that allows one to breakaway cables. I couldn't find the exact model for that so I'll just call it a molex style connection. It's entirely possible to cut the wires from that and build your own harness that will correctly fit Whatever you'd like to use it for.
-
- Please Continue...
- Posts: 4
- Joined: March 26th, 2017, 4:00 pm
- Location: planet earth
Re: NAMCO System 369 controls
Thank you for reply.
AFAIU, these connectors are standard for japanese cabinets. So there must be some name for them or at least some board where they connect to...
And yeah, I can cut the cables, but I would like to do it properly.
AFAIU, these connectors are standard for japanese cabinets. So there must be some name for them or at least some board where they connect to...
And yeah, I can cut the cables, but I would like to do it properly.
-
- Posts: 2
- Joined: April 3rd, 2016, 10:09 pm
- Location: Iwade, UK
Re: NAMCO System 369 controls
It's an AMP UP connector: -
http://wiki.arcadeotaku.com/w/AMP_Universal_Power
http://wiki.arcadeotaku.com/w/AMP_Universal_Power
-
- Please Continue...
- Posts: 4
- Joined: March 26th, 2017, 4:00 pm
- Location: planet earth
Re: NAMCO System 369 controls
Wow, thanks a lot! That's really helpful. Now only have to find an IO-Board for it!