NAMCO System 369 controls

Arcade cabinet hardware and accessories
Post Reply
useretail
Please Continue...
Posts: 4
Joined: March 26th, 2017, 4:00 pm
Location: planet earth

NAMCO System 369 controls

Post by useretail »

Hi, I have System 369 with Tekken Tag 2 and Tekken 6 controls with a connector shown below
What boards/adapters do I need connect such controls to the system?
Image

I also found this diagram:
Image

If I understand correctly, according to it, I need only IO Board, however all Namco IO boards that I saw doesn't have such connector.
So I guess something else is needed.
User avatar
FoxhoundOh
Please Continue...
Posts: 11
Joined: March 1st, 2017, 9:02 pm
Location: Texas
Initials: FOX

Re: NAMCO System 369 controls

Post by FoxhoundOh »

That's a 12 pin wiring harness that allows one to breakaway cables. I couldn't find the exact model for that so I'll just call it a molex style connection. It's entirely possible to cut the wires from that and build your own harness that will correctly fit Whatever you'd like to use it for.
useretail
Please Continue...
Posts: 4
Joined: March 26th, 2017, 4:00 pm
Location: planet earth

Re: NAMCO System 369 controls

Post by useretail »

Thank you for reply.
AFAIU, these connectors are standard for japanese cabinets. So there must be some name for them or at least some board where they connect to...
And yeah, I can cut the cables, but I would like to do it properly.
channel27
Posts: 2
Joined: April 3rd, 2016, 10:09 pm
Location: Iwade, UK

Re: NAMCO System 369 controls

Post by channel27 »

useretail
Please Continue...
Posts: 4
Joined: March 26th, 2017, 4:00 pm
Location: planet earth

Re: NAMCO System 369 controls

Post by useretail »

Wow, thanks a lot! That's really helpful. Now only have to find an IO-Board for it!
Post Reply