All the Capcom I/O boards I have found so far are going for $180 USD or above after shipping.
So I'm trying to come up with a more economic solution, would it work the same way if I use a Sega 600-7143-003 loom (provide power and receive stereo sound input):
plus a Sega I/O board (convert USB control input)?
Video will output directly from Naomi to the monitor.
Thanks in advance.
I/O board + Power for playing Naomi in a Blast City
-
- Please Continue...
- Posts: 51
- Joined: February 14th, 2017, 2:11 am
- Location: Canada
- dj_johnnyg
- Loves CAVE
- Posts: 727
- Joined: August 18th, 2008, 5:53 am
- Location: Auckland, NZ
Re: I/O board + Power for playing Naomi in a Blast City
Does the Blast have 3.3V on the PSU? If not, you're still going to need one for the Naomi.
Also, you may need an Audio AMP if the blast doesn't have one either.
Also, you may need an Audio AMP if the blast doesn't have one either.
Snakes: They're like bits of rope, only angrier.
- nem
- Needs a custom rank
- Posts: 2768
- Joined: August 17th, 2008, 6:59 pm
- Location: Finland
Re: I/O board + Power for playing Naomi in a Blast City
Blast has both 3.3V and an audio amp.dj_johnnyg wrote:Does the Blast have 3.3V on the PSU? If not, you're still going to need one for the Naomi.
Also, you may need an Audio AMP if the blast doesn't have one either.
namstephan's economic solution is perfectly fine for the job.