Seimitsu LS-32 on Sega Panels

[Scaffa]

I think this may have been done to death already, but has anyone found an adapter (or mod method) to mount LS-32's on Sega panels?

I have an NNC two player panel which has some of the baggiest Seimitsu's I've ever used so I'm desperate to get rid of them! Also I have a one player Capcom panel which has a JLF - and a different plate.

Pictures below. One of them contains a mounting plate that neo-legend advertise as for mounting LS32 in Sega panels but as you can see it's no good for mine.

[Rossyra]

Assuming the one on the right is yours, there is no adapter plate that will allow you to mount an LS-32 to that plate, the footprint of the LS-32 pivot is wider than those holes. Even if it was possible, the stick would be sitting ridiculously low.

The earlier Naomi 2L6B plates are Seimitsu compatible (NOA-2003).

[Chempop]

It looks like you have a sanwa panel, a LS-32 will not mount to that. The new "licensed by sega" sanwa panels use a wider mount that accommodates the RE plate which allows LS-32 to mount, but as mentioned the stick will sit low and the shaft might be too short for some people. You could use a VF plate and LS-56/58 on the panel you have, but again, it will be a tad on the short side (I actually prefer it).

[Scaffa]

Cheers for the replies! I thought as much.

I've modified the Sanwa to make it more usable and I guess I'll try out LS-56's for the 2L12B NNC panel.

Shame, I really do love the LS-32

[markedkiller78]

Would you be able to make a mounting plate? Surely it just needs to be flush, have 4 holes for the ls32 screws and 4 holes for the cp bolts?

[Scaffa]

I think the base of the LS-32 might be too big to re-use the holes on those existing plates. I'm gonna give it a look at sometime this week.

Would be lovely if they just copied the mounting plate on the bottom of Madcatz TE's..can get every stick under the sun on those. Tho with Sanwa and Seimitsu being the manufacturers of newer panels I guess it's understandable they won't support other peoples product.

[FrancoB]

[I did it] but it was a pain in the ****.

I would take the advice in post #2, I'm using them in that cab now anyway

[clarkey]

Sorry to Hijack the thread but I am having a similar issue. I have the panel in the pictures and was told the LS 32 would fit however they do not could you advise if I can get some sort of adapter to make them fit or have I been sold the wrong sticks?





Thanks

[Scaffa]

If you're not using them anymore Francobabes fancy a cheeky swapsies?

Clarkey: Can you measure the distance on the single holes in the center of those brackets? It looks like those French adapter plates I was sold could fit yours, in which case I'll sort you out with them

[FrancoB]

I don't think I have all of the parts of them any more as I use them on my wiring jig. Besides, you would need to modify the CP brackets anyway.

Just get some LS-56s, they're like a nicer LS-32 imo.

[clarkey]

Thanks Scaffa will do when I get home and update.

[Chempop]

clarkey, what you have on your sticks are the newer style SS plates. You need the older style NA mounting plate.

You could try here, I'm pretty certain these are the ones:
http://www.leshoparcade.com/fiche_produ ... 20Seimitsu

[Scaffa]

Those are the ones I have spare.

[clarkey]

The measurement (small center whole) of each bracket to bracket is 9.5cm

Does that sound like these will fit?

Thanks

[clarkey]

Just to be clear please see these pics.

Thanks for all your help.

[Scaffa]

Yeah dude these brackets are 100% for that panel. PM incoming.

[clarkey]

Thanks have sent you a reply

[Zakomon]

I will get a Blast City Panel (OOM-8-6BSRT-H) and want do use the LS-32 on it. Do you know if this would fit?

[Rossyra]

I will get a Blast City Panel (OOM-8-6BSRT-H) and want do use the LS-32 on it. Do you know if this would fit?

It's a Sanwa plate, so almost certainly not.

http://forum.arcadeotaku.com/viewtopic. ... 46#p255061"