How do I get my Spinners to work on Puzz Loop?

[slapaham]

I cannot get my spinners to work at all.

I'm trying to get them up and running on Puzz Loop on the Kaneko Super Nova...

I have set up 'knobs' as an input on the test menu (switching it to dip switch one), saved the settings and nothing.

Is there a dip switch I must have on to get them working?

Also, I have control looms plugged in for the buttons - this shouldn't affect anything should it?

I'm just not sure what else to try!?

Anyone able to help me at all please?

[emphatic]

From a Swedish forum thread:

On the CN6 connector you connect your spinner thusly:
1. +5VDC
2. 1p
3. 2p
4. -
5. -
6. 1p
7. 2p
8. GND

As I understand it, you just use +5VDC and GND to your spinner, right?

Or you can modify your JAMMA on the mobo like this:

[slapaham]

Thanks for the info...

Bit confusing though... there is a connection and loom (which I have) connected to the mobo - so technically there shouldn't be a need to do any wiring yourself...

[emphatic]

Sorrry, the last picture is if you want to be able to use sticks or spinner without using any other means of connection than your JAMMA harness. I guess. Not my guide. Just use the pinout I posted and you will be fine (I guess). What type of spinner do you have? Seimitsu? I've heard they can be a real bitch to calibrate sometimes.

[slapaham]

I think they they are Siemitsus - I will have a look!