Hi guys
bought a original Gaia Crusaders PCB several weeks ago.
Seller warned me that it takes several times before the PCB fires up correctly.
which it does properly with my MAK.
Problem is that i.e. the Logo at the beginning and grafik layers in the levels disappear or don't show up at all.
any idea what the issue is? Or is it an issue with my MAK?
thanks!
Gaia Crusaders - bugs
- Yamazaki
- Posts: 118
- Joined: April 9th, 2017, 9:27 pm
- Location: Germany
- eBay: nippon-net_de
- Asayuki
- Please Continue...
- Posts: 431
- Joined: August 29th, 2015, 10:16 pm
- Location: Remuria, Germany
Re: Gaia Crusaders - bugs
The easiest thing to look for is loose joints. Try lightly knocking on the pcb with some non-conductive object like the handle of a screwdriver.
You will see immediately if it's a loose-joint dependent issue.
Otherwise please post some photos or, even better, videos.
You will see immediately if it's a loose-joint dependent issue.
Otherwise please post some photos or, even better, videos.
My 15kHz cabinet Peplos will never power up, with any item, and I am quite proud of that.
- Yamazaki
- Posts: 118
- Joined: April 9th, 2017, 9:27 pm
- Location: Germany
- eBay: nippon-net_de
Re: Gaia Crusaders - bugs
the status at the moment:
- using my MAK - game starts but with Background errors and missing graphic layers
- using my Blast City - I get a BG Ram 2 NG error - and the game won't start
- using my friends MAK - game needs several attempts but will in the end run without any bugs/glitches.
really strange
- using my MAK - game starts but with Background errors and missing graphic layers
- using my Blast City - I get a BG Ram 2 NG error - and the game won't start
- using my friends MAK - game needs several attempts but will in the end run without any bugs/glitches.
really strange
- Flinnster
- Please Continue...
- Posts: 334
- Joined: September 19th, 2016, 12:06 am
- Location: Surrey
- eBay: flinnster
- Initials: KID
Re: Gaia Crusaders - bugs
Sounds like low voltage to me. Check your +5v etc...
WTD: Rolling Thunder pcb, ANY Dino King / Love & Berry / MushiKing spare parts!!
-
- Posts: 191
- Joined: April 26th, 2017, 3:47 pm
- Location: Canada
- eBay: hrvaat
Re: Gaia Crusaders - bugs
And clean the **** out of the edge connector if you haven't already!
candy: Sega New Astro City x2, Sega Versus City (sold)
Seeeegggggaaaaaa
Seeeegggggaaaaaa
- Yamazaki
- Posts: 118
- Joined: April 9th, 2017, 9:27 pm
- Location: Germany
- eBay: nippon-net_de
Re: Gaia Crusaders - bugs
Wanted to check the voltage setting on my Blast City.
Afaik there is a modulator inside the cab near the PSU is that correct?
EDIT: found them - were covered in dust lol
Afaik there is a modulator inside the cab near the PSU is that correct?
EDIT: found them - were covered in dust lol