Naomi hardware in Astro City
- DaveyD
- Posts: 344
- Joined: December 9th, 2014, 7:14 am
- Location: Grimsby, UK
- eBay: Dr_Daph
- Initials: DPD
Naomi hardware in Astro City
Has anyone come up with a nice elegant solution to fitting all the required parts to play Naomi games into an Astro City i.e Naomi motherboard, Sun PSU, and Capcom IO. without just piling it all on top of each other and wedging the door shut
- Sp33dFr34k
- Posts: 277
- Joined: December 3rd, 2011, 12:27 pm
- Location: The Netherlands
- eBay: 3d_collector
Re: Naomi hardware in Astro City
Yes. NVS-4000 for power and sound, wire up a Sega JVS IO and mount it to the side of the cab for controls and VGA via a small converter or hook up a 31khz chassis
With that setup you don't need the SUN PSU and the big Capcom converter.
You just have the Naomi on a wooden board et voila
With that setup you don't need the SUN PSU and the big Capcom converter.
You just have the Naomi on a wooden board et voila
-
- Please Continue...
- Posts: 113
- Joined: August 8th, 2009, 12:06 am
- Location:
Re: Naomi hardware in Astro City
All the components are usually mounted onto a piece of MDF that can slide in and out of the astro city.
http://www.aussiearcade.com/attachment. ... 1422827859
http://www.aussiearcade.com/attachment. ... 1422827859