JVS PCB gives I/O error
- PascalP
- Please Continue...
- Posts: 75
- Joined: August 23rd, 2015, 6:41 am
- Location: Netherlands
- eBay: peule_p
- Initials: PPP
JVS PCB gives I/O error
So I have a Tekken 3 PCB which gives an error when connected via JVS.
If I connect the pcb via Jamma it works fine!
I also have another Tekken 3 board, if I connect this to my cab via JVS it works fine, so the problem should not be my cab (Namco Cyberlead)
This is the error screen I get:
http://s429.photobucket.com/user/peulen ... 3.jpg.html
If I connect the pcb via Jamma it works fine!
I also have another Tekken 3 board, if I connect this to my cab via JVS it works fine, so the problem should not be my cab (Namco Cyberlead)
This is the error screen I get:
http://s429.photobucket.com/user/peulen ... 3.jpg.html
Last edited by PascalP on February 3rd, 2016, 4:57 pm, edited 1 time in total.
- PascalP
- Please Continue...
- Posts: 75
- Joined: August 23rd, 2015, 6:41 am
- Location: Netherlands
- eBay: peule_p
- Initials: PPP
Re: JVS PCB gives error
I did notice the 2 pcb's are different revisions:
- TET 3 Rev A is on the working board
- TET 2 Rev E is on the non-working board
- TET 3 Rev A is on the working board
- TET 2 Rev E is on the non-working board
- PascalP
- Please Continue...
- Posts: 75
- Joined: August 23rd, 2015, 6:41 am
- Location: Netherlands
- eBay: peule_p
- Initials: PPP
Re: JVS PCB gives error
Nobody had similar errors before?
- PascalP
- Please Continue...
- Posts: 75
- Joined: August 23rd, 2015, 6:41 am
- Location: Netherlands
- eBay: peule_p
- Initials: PPP
Re: JVS PCB gives error
Small bump!
Got another Namco System 12 board which gives the same error in my Cyberlead now... (Soul Caliber)
Should be some fix available, right?
Got another Namco System 12 board which gives the same error in my Cyberlead now... (Soul Caliber)
Should be some fix available, right?
- Niko
- Please Continue...
- Posts: 50
- Joined: May 19th, 2015, 4:27 pm
- Location: Louisville, KY
Re: JVS PCB gives I/O error
You using a loopback cable with the JVS I/O? You need to connect pins 1 & 3.
- PascalP
- Please Continue...
- Posts: 75
- Joined: August 23rd, 2015, 6:41 am
- Location: Netherlands
- eBay: peule_p
- Initials: PPP
Re: JVS PCB gives I/O error
Sorry, this doesn't mean anything to me...?Niko wrote:You using a loopback cable with the JVS I/O? You need to connect pins 1 & 3.
The I/O board is connected to the game PCB with a standard USB cable, if that helps?
- PascalP
- Please Continue...
- Posts: 75
- Joined: August 23rd, 2015, 6:41 am
- Location: Netherlands
- eBay: peule_p
- Initials: PPP
Re: JVS PCB gives I/O error
Got some more JVS stuff to test:
- Sega Naomi, works
- Namco System 246 and 256, both throw a I/O mismatch error...
My guess would be that the later revision Namco boards would expect a later revision I/O and Display with colours...?
- Sega Naomi, works
- Namco System 246 and 256, both throw a I/O mismatch error...
My guess would be that the later revision Namco boards would expect a later revision I/O and Display with colours...?
- Usukane
- Please Continue...
- Posts: 6
- Joined: May 18th, 2015, 4:21 am
- Location: Denver
- eBay: buy-my-games
- Initials: bmo
Re: JVS PCB gives I/O error
Not sure what the problem is either but I have 4 cyber leads and it only does that in 1 out of 4 cabinets. No setting different.. not sure why it does it I cannot find any difference in settings between them.. maybe it's a version compatibility problem? The one that it doesn't work in I'm fairly sure I've replaced the I/O before..
- PascalP
- Please Continue...
- Posts: 75
- Joined: August 23rd, 2015, 6:41 am
- Location: Netherlands
- eBay: peule_p
- Initials: PPP
Re: JVS PCB gives I/O error
He,Usukane wrote:Not sure what the problem is either but I have 4 cyber leads and it only does that in 1 out of 4 cabinets. No setting different.. not sure why it does it I cannot find any difference in settings between them.. maybe it's a version compatibility problem? The one that it doesn't work in I'm fairly sure I've replaced the I/O before..
Would be cool to have 4 Cyberleads!!
Could you do a test and see which versions the I/O boards and display are in your cabs.
This would help a lot to identify the issue
This is the version of my I/O board (1.03)
And this is the version of my display (1.02), red color only
- Usukane
- Please Continue...
- Posts: 6
- Joined: May 18th, 2015, 4:21 am
- Location: Denver
- eBay: buy-my-games
- Initials: bmo
Re: JVS PCB gives I/O error
Yup seems to be he problem here as well... can't upload a photo ATM but that's exactly what I'm seeing here
- PascalP
- Please Continue...
- Posts: 75
- Joined: August 23rd, 2015, 6:41 am
- Location: Netherlands
- eBay: peule_p
- Initials: PPP
Re: JVS PCB gives I/O error
I recently replaced my V1 I/O for a V2 and replaced the red display with a color display, result: every JVS gsme working now
- Rossyra
- Supermod
- Posts: 7902
- Joined: February 12th, 2009, 1:24 am
- Location: UK