Xbox360 to JVS Naomi Cab.. ? Anyone done it ?

PCB problems and fixes
Post Reply
User avatar
colinmac
Please Continue...
Posts: 133
Joined: April 3rd, 2013, 9:28 pm
Location: Fife, Scotland
eBay: Fifeauctions18
Initials: COL

Xbox360 to JVS Naomi Cab.. ? Anyone done it ?

Post by colinmac »

Just wondering about the possiblity of running a Xbox360 in my Naomi universal. Presume I'd need to build some sort of harness to a controller IO board for the CP. Anyone done this? I'd be keen to find out how was/is best...

Ta !
Dexa
Posts: 155
Joined: March 21st, 2011, 8:45 pm
Location: Germany

Re: Xbox360 to JVS Naomi Cab.. ? Anyone done it ?

Post by Dexa »

i use a jvs-pac connected to a cronusmax which is connected to the xbox 360.
works surprisingly good and lag less :D

if anyone did a jvs to 360 board it would be even better, but i haven't seen those.
User avatar
colinmac
Please Continue...
Posts: 133
Joined: April 3rd, 2013, 9:28 pm
Location: Fife, Scotland
eBay: Fifeauctions18
Initials: COL

Re: Xbox360 to JVS Naomi Cab.. ? Anyone done it ?

Post by colinmac »

Just the job - already have a JVSPac - will sort that out.

Cheers !
User avatar
colinmac
Please Continue...
Posts: 133
Joined: April 3rd, 2013, 9:28 pm
Location: Fife, Scotland
eBay: Fifeauctions18
Initials: COL

Re: Xbox360 to JVS Naomi Cab.. ? Anyone done it ?

Post by colinmac »

Did you have to program the cronusmax for cab play ?
User avatar
bartre
Please Continue...
Posts: 13
Joined: April 15th, 2015, 4:54 am
Location:

Re: Xbox360 to JVS Naomi Cab.. ? Anyone done it ?

Post by bartre »

I'm pretty sure I've seen it on Neo.

A padhack box wired to the buttons and using the VGA input on the monitor would be simple enough.
User avatar
joeks
Posts: 184
Joined: January 8th, 2009, 6:57 pm
Location: The Netherlands
eBay: barrybuise
Initials: BAJ
Contact:

Re: Xbox360 to JVS Naomi Cab.. ? Anyone done it ?

Post by joeks »

I've done it with two PS360+ pcb's, works great.

Have two PS360+ pcb's with complete wiring harness with connectors (for use in Naomi/NNC) for two players available if you want.

Image
Makes Arcade Artwork Reproductions at www.arcadeartrepro.com
User avatar
KmanSweden
KmanSweden
Posts: 1242
Joined: October 13th, 2010, 10:37 am
Location: Stockholm, Sweden
eBay: KmanSweden
Initials: PKK
Contact:

Re: Xbox360 to JVS Naomi Cab.. ? Anyone done it ?

Post by KmanSweden »

I'll get in line for those if colinmac doesn't buy them.
Up the Irons!
User avatar
colinmac
Please Continue...
Posts: 133
Joined: April 3rd, 2013, 9:28 pm
Location: Fife, Scotland
eBay: Fifeauctions18
Initials: COL

Re: Xbox360 to JVS Naomi Cab.. ? Anyone done it ?

Post by colinmac »

joeks wrote:I've done it with two PS360+ pcb's, works great.

Have two PS360+ pcb's with complete wiring harness with connectors (for use in Naomi/NNC) for two players available if you want.

Image
Ooh ! That seems like it would do nicely! Will PM you... :awe:
User avatar
majors
Posts: 179
Joined: November 5th, 2008, 12:36 am
Location: N. Carolina
Contact:

Re: Xbox360 to JVS Naomi Cab.. ? Anyone done it ?

Post by majors »

bartre wrote: A padhack box wired to the buttons and using the VGA input on the monitor would be simple enough.
Yep, that is what I did to get some "cost effective" Cave running.
Majors -=- Wedoca '18
Post Reply