PCB newbie questions

Coin-operated games and arcades.
Forum rules
ArcadeOtaku forum introduction & rules
tzakiel
Posts: 55
Joined: January 10th, 2017, 3:28 am
Location: Virginia, USA

PCB newbie questions

Postby tzakiel » January 27th, 2017, 1:51 am

I've never actually hooked up and used a PCB. I did pick up a very cheap one to test my new cabinet with. I do plan on picking up more expensive ones.

- Do I hook it up bare? Does it need to be mounted or something or can I just stand it on its edge and lean it against wall inside the cab? Will this damage it?

- any other tips for maintainence or storage, things to look out for or I should be aware of?
User avatar
Sumez
Posts: 44
Joined: December 12th, 2016, 8:45 am
Initials: SMZ
Location: Denmark

Re: PCB newbie questions

Postby Sumez » January 27th, 2017, 9:51 am

Depends on the cab. If it's standing on its side, there shouldn't be an issue, but even then I'd still be careful if your cabinet has metal sides inside (like most candy cabs do). In my old wood cab I just rested the PCB's on the side, but in my New Astro City, I use the wooden board you can slide in with PCBs on them.

But instead of screwing PCB feet onto it, I just made two hooks that I can hang them in from the upper edge of the board. Makes it really simple to switch out PCBs often.

I'd buy PCB feet for every PCB that don't have them though. They are really cheap, and I think it helps a lot with handling the PCBs in a cab.
User avatar
monouchi
Posts: 986
Joined: February 21st, 2010, 6:16 pm
eBay: monouchi_jn
Initials: BUS
Location: Sweden

Re: PCB newbie questions

Postby monouchi » January 27th, 2017, 10:32 am

Also, you can buy a PCB holder and attach it to the wooden board. (If you have the board?)
Then its very easy to change PCBs.
User avatar
Moonwalker
Posts: 149
Joined: October 7th, 2015, 10:03 pm
Aliases: Takuma
eBay: Glmorgenstern
Initials: TOA
Location: Cologne, Germany

Re: PCB newbie questions

Postby Moonwalker » January 27th, 2017, 12:02 pm

Mine are just standing inside the cabs, leaning to the wooden board. No issues so far.
User avatar
emphatic
Breastfeeds when required
Posts: 6926
Joined: April 7th, 2009, 4:14 pm
Aliases: emphatic everywhere, baby!
eBay: jorgen_sjolander
Gamertag: emphatic001
Initials: JOR
Location: Alingsås, Sweden
Contact:

Re: PCB newbie questions

Postby emphatic » January 27th, 2017, 2:27 pm

These guys know their stuff.

If you just want to test your cabinet, using a piece of cardboard between the PCB and what's underneath works well if you're scared (like many are in the beginning). I have wooden floors in my apartment, so I just make sure the game board's not leaning agains anything conductive.
User avatar
cools
Armed Police Buttrider
Posts: 13434
Joined: August 17th, 2008, 4:49 pm
eBay: hordarian
Initials: CLS
Location: Wales, United Kingdom
Contact:

Re: PCB newbie questions

Postby cools » January 27th, 2017, 3:20 pm

Image
Image
tzakiel
Posts: 55
Joined: January 10th, 2017, 3:28 am
Location: Virginia, USA

Re: PCB newbie questions

Postby tzakiel » January 28th, 2017, 7:51 am

Thanks all. I am not sure if my blast will come with a wood board or not. It's a Blast City, do they usually come with one? In any case, what sort of screws or pegs do I need?
User avatar
Casey120
The Fluffer
Posts: 1297
Joined: November 27th, 2009, 10:42 pm
eBay: Tappygielen
PSN: Casey120
Initials: CVW
Location: The Netherlands

Re: PCB newbie questions

Postby Casey120 » January 28th, 2017, 9:52 am

You could use one of these :

http://in2amusements.com.au/arcade-acce ... cb-holder/


Look at this thread for further reference :

viewtopic.php?f=2&t=14751
User avatar
tomiii
Posts: 32
Joined: January 18th, 2017, 7:35 am
Location: Austria

Re: PCB newbie questions

Postby tomiii » February 13th, 2017, 8:47 pm

In my Royal Video Special Cab I have an PCB holder.
Easy for switching PCB'S.

Image

Return to “Arcade Games”



Who is online

Users browsing this forum: No registered users