Two new naomi netboot options

Coin-operated games and arcades.
Forum rules
ArcadeOtaku forum introduction & rules
devtty0
Posts: 15
Joined: July 30th, 2014, 5:29 pm

Re: Two new naomi netboot options

Postby devtty0 » March 30th, 2016, 1:08 pm

Pi3 image is done & another pi3 image with the GPIO patch .. they are taking forever to upload though!
devtty0
Posts: 15
Joined: July 30th, 2014, 5:29 pm

Re: Two new naomi netboot options

Postby devtty0 » April 1st, 2016, 2:50 pm

The download links for the Pi version 3 inbuilt wireless card and GPIO pins are up on the github pages:

https://github.com/dev-tty0/Piforce-Web
https://github.com/dev-tty0/Piforce-Single

let me know any issues - I've tested the python for the GPIO, but I dont have the physical setup to confirm it works! .. let me know :D
nam9
Posts: 3
Joined: January 27th, 2016, 3:24 pm
Location: Norway

Re: Two new naomi netboot options

Postby nam9 » April 11th, 2016, 11:47 am

Awesome! I have all the parts at home to build the reset circuitry - best get on it!

Cheers!
arcadefanWC
Posts: 4
Joined: January 8th, 2016, 11:42 pm
Location: US

Re: Two new naomi netboot options

Postby arcadefanWC » April 12th, 2016, 5:35 am

This looks awesome. I have the Raspberry Pi 2 that I am net booting with the LCD screen. Works fine, but the part that I am most interested in is the hard-reset for games that don't reload when net booting (UPDATE - support for GPIO pins for hard-reset of games). So is there a version that works with the Raspberry Pi Version 2 that allows the hard-reset for required games and it is software only? That is amazing as I thought there were no software mods (only hardware) to get these games to load without rebooting the entire Naomi setup. That is a big deal so you don't have to go inside the Naomi and work with any hardware modifications - it is strictly done with the new revised software? If so - that is great!
devtty0
Posts: 15
Joined: July 30th, 2014, 5:29 pm

Re: Two new naomi netboot options

Postby devtty0 » April 12th, 2016, 8:22 pm

Firstly; sorry to the people I never replied to - I need to check the forum more often - send me PM's!

to answer arcadefan, I've not updated the PI2 image with the GPIO setup, (although you also need the hardware addition from here to make it work : http://www.arcade-projects.com/forums/i ... 8#post6248 )

if anyone wants me to update the PI2 image, let me know, but the PI3 is sooo much easier to get going, with the inbuilt wireless adapter which supports AP mode out of the box!
Tony123
Posts: 1
Joined: April 24th, 2016, 8:57 pm
Location: BERLIN

Re: Two new naomi netboot options

Postby Tony123 » April 24th, 2016, 9:03 pm

I tested PiForce-Web today with a Raspberry Pi 3.
It works pretty well but unfortunately all Naomi 2 Roms and several Atomiswave Roms (e.g. Metal Slug 6) do not show up in the web interface.
Any idea why? When I use the same Roms with PiForce-Single they will load without problem.
Can anybody let me know the correct file names?
My configuration is Raspberry Pi 3, Naomi 2 with Multi-Bios, NetDimm 4.02
devtty0
Posts: 15
Joined: July 30th, 2014, 5:29 pm

Re: Two new naomi netboot options

Postby devtty0 » April 27th, 2016, 1:02 pm

Hey,

yeah - its a simple reason - I've not included the pictures and filenames in the script for Naomi2 games ;)

can you forward me / PM me a list of the games, the filenames, and I will update the image

(I didnt think people were using these :lol: )
PheNOM07
Posts: 6
Joined: December 30th, 2009, 5:47 am

Re: Two new naomi netboot options

Postby PheNOM07 » May 17th, 2016, 2:54 am

Has this image been updated yet? Thanks in advance
devtty0
Posts: 15
Joined: July 30th, 2014, 5:29 pm

Re: Two new naomi netboot options

Postby devtty0 » May 17th, 2016, 3:13 pm

Yup, new image is now up - sorry life got busy :lol:

* Added support for naomi 2 and Atomiswave games
* Added shutdown and reboot links from the web page to shut down the pi cleanly

download link is http://www.mediafire.com/download/6mcsf ... v1.1.1.zip

should be fine, but let me know any feedback/bug fixes etc. :)
Last edited by devtty0 on May 19th, 2016, 7:54 pm, edited 1 time in total.
User avatar
longobongo
Posts: 12
Joined: July 4th, 2015, 10:57 pm
eBay: longobongo
Gamertag: bulletsmoke
PSN: bulletsmoke
Location: Toronto, Ontario, Canada

Re: Two new naomi netboot options

Postby longobongo » May 17th, 2016, 10:58 pm

devtty0 wrote:Hey,

sorry for the late reply - I totally missed that :eh: .. yes, it is totally compatible with that solution and should be easy to integrate..

.. in fact, seeing as the PI3 has an inbuilt wireless antenna, that should make everything loads easier - no messing about getting the right wireless adapter! just burn the sd card and use it in an unmodified PI3!

I will push out an updated image once I manage to get hold of a PI3 :awe:


cool beans, i think i'll pickup at Pi 3 just for this reason, i have the exact same netgear adapter and it still gave me issues
planexcvs
Posts: 27
Joined: June 7th, 2010, 7:46 am
eBay: came-hal
Location: Southern California, USA

Re: Two new naomi netboot options

Postby planexcvs » May 18th, 2016, 4:39 pm

devtty0 wrote:Yup, new image is now up - sorry life got busy :lol:

* Added support for naomi 2 and Atomiswave games
* Added shutdown and reboot links from the web page to shut down the pi cleanly

download link is http://www.mediafire.com/download/1nbs2 ... 3-v1.1.rar

should be fine, but let me know any feedback/bug fixes etc. :)


:thumbup: Awesome stuff.
devtty0
Posts: 15
Joined: July 30th, 2014, 5:29 pm

Re: Two new naomi netboot options

Postby devtty0 » May 19th, 2016, 12:06 pm

actually .. just spotted a stupid PHP error that could cause games to not load properly .. give me a couple of hours to update it,

sorry..

EDIT : all sorted now, new link is: http://www.mediafire.com/download/6mcsf ... v1.1.1.zip

sorry to anyone that messed about with 1.1!
nam9
Posts: 3
Joined: January 27th, 2016, 3:24 pm
Location: Norway

Re: Two new naomi netboot options

Postby nam9 » June 30th, 2016, 9:51 pm

Hi devtty0,

Just picked up a RPi3. Does the pi3-4g-gpio-final image support AW & Naomi2 games? Mine don't seem to show up?

Also... not sure if you have these ones covered yet...

Awesome work!
crazyjojo
Posts: 3
Joined: July 2nd, 2016, 3:45 am
Location: china

Re: Two new naomi netboot options

Postby crazyjojo » July 2nd, 2016, 4:11 am

naomi2 netboot need help!!!!!!
I want to set IP as 192xxxxxxxxx,but it always shows "DIMM board timeout" after I set,and IP still is "0.0.0.0"
everything I changged in net setting will fail.
where is the problem?I have changed an checked the SDRAM 3tims,all the same!
alexjames
Posts: 1
Joined: July 20th, 2016, 4:19 pm
Location: UK

Re: Two new naomi netboot options

Postby alexjames » July 20th, 2016, 4:25 pm

I'd love to have the chance to get this working but the download link doesn't seem to be working.

Does anyone have the Pi3 image?
decapitate85
Posts: 2
Joined: August 15th, 2016, 1:09 pm
Location: Italy

Re: Two new naomi netboot options

Postby decapitate85 » August 15th, 2016, 1:11 pm

Please I'm begging you, kindly add initial d 3 export or post a guide, if it is possible, on how to add games.

Even those for the triforce would be kindly appreciated.

Thanks a lot for your efforts and support.

Marco from Italy.
User avatar
Hellfromabove
Posts: 221
Joined: January 8th, 2009, 11:19 am
Gamertag: H3llfromabove
PSN: Hell From Above
Location: SoCal

Re: Two new naomi netboot options

Postby Hellfromabove » August 20th, 2016, 1:00 am

I've been meaning to get around and try one of these out. Thanks for the share.
devtty0
Posts: 15
Joined: July 30th, 2014, 5:29 pm

Re: Two new naomi netboot options

Postby devtty0 » August 20th, 2016, 10:55 am

Hey,

Initial D 3 export should be there already - make sure you are using the latest image (from: http://www.mediafire.com/download/6mcsf ... v1.1.1.zip) and the rom name is:

Initial_D3_Export.bin
(case sensitive!)

the others are:
InitialD3Export = {'Initial_D3_Export.bin' }
InitialD2Export = {'InitialD2exp.bin' }
InitialDExport = {''InitialDexp.bin' }
InitialD2Japanese = {'InitialD2jap.bin' }
InitialDJapanese = {'InitialDjap.bin' }

let me know how you get on!!


I've not added triforce yet .. no-one has asked for it! .. I could do though?


If you want to try yourself, download the source, its on github (https://github.com/dev-tty0/Piforce-Web ... stream.zip) .. and the filenames are in write_web.py ..

cheers :)
jedivoodoo
Posts: 1
Joined: February 25th, 2017, 11:23 pm
Location: USA

Re: Two new naomi netboot options

Postby jedivoodoo » February 25th, 2017, 11:34 pm

First off, thank you so much for this. I've been using it since release and it helps a ton.

Second, is there any way to edit the webpage template from an already burned image? I wanted to add a couple of newly converted Atomiswave games like The King of Fighters XI and Dirty Pigskin Football, and maybe change some of the images or even add some text under each game giving a brief description. Thanks!
devtty0
Posts: 15
Joined: July 30th, 2014, 5:29 pm

Re: Two new naomi netboot options

Postby devtty0 » March 13th, 2017, 3:12 pm

I've updated the image again with a number of feature requests; mainly to move the image files and names to the Windows (fat32) partition so that they can be easily edited, and added options to auto-load the last played game, and to shutdown the Pi following 10 minutes.

The full list of changes:

UPDATE - v1.2 - option to auto-load the last played game
UPDATE - v1.2 - option to auto-shutdown the file system after loading
UPDATE - v1.2 - config menu and shutdown links from every web-page
UPDATE - v1.2 - adds support for naomi2, atomswave, triforce and chihiro games
UPDATE - v1.2 - moves the game names, images and rom names to a .csv (excel) file in the Windows partition (/config/roms.csv) so its easy to amend or changing the pictures and text that are displayed for each game on the web page.
UPDATE - v1.2 - move the image folder to /config/images/ on the Windows (fat32) partition so the image files/pictures can be swopped easily.
UPDATE - v1.2 - integrated GPiO support for this project: http://www.arcade-projects.com/forums/i ... 8#post6248

download link:
http://www.mediafire.com/file/clh9bzq16 ... b-v1.2.zip

Return to “Arcade Games”



Who is online

Users browsing this forum: No registered users