Hey guys, where can I get a good quality JAMMA harness? Bought one from Arcade Forge and it's - for lack of a better word - crap.
I cba making my own so looking for an off the shelf one.
Jamma harness
-
- Please Continue...
- Posts: 14
- Joined: February 25th, 2017, 8:23 pm
- Location: Uk
- eBay: Polygonwindow
- mufunyo
- Posts: 648
- Joined: August 21st, 2008, 12:26 am
- Location: Eindhoven, NL
- eBay: mufunyo
- Initials: MUF
- Flinnster
- Please Continue...
- Posts: 334
- Joined: September 19th, 2016, 12:06 am
- Location: Surrey
- eBay: flinnster
- Initials: KID
Re: Jamma harness
I got my last few from ArcadeWorld.. https://www.arcadeworlduk.com/categorie ... a/Harness/
They seem OK, but ultimately all this stuff is cheaply imported from somewhere in Asia![Sad :(](./images/smilies/icon_pubjoe_sad.gif)
They seem OK, but ultimately all this stuff is cheaply imported from somewhere in Asia
![Sad :(](./images/smilies/icon_pubjoe_sad.gif)
WTD: Rolling Thunder pcb, ANY Dino King / Love & Berry / MushiKing spare parts!!
-
- Please Continue...
- Posts: 14
- Joined: February 25th, 2017, 8:23 pm
- Location: Uk
- eBay: Polygonwindow
Re: Jamma harness
Haha! Fair enough. They are veeeery slow at shipping too but that's another story.mufunyo wrote:FTFYGrandiloquence wrote:Arcade Forge is - for lack of a better word - crap.
-
- Please Continue...
- Posts: 14
- Joined: February 25th, 2017, 8:23 pm
- Location: Uk
- eBay: Polygonwindow
Re: Jamma harness
That's my concern - they allegedly really skimp on the copper in the wires. It's really weird - if I connect a board to my supergun with the harness it doesn't work but the Pandora's Box does (although the image shifts about 2 inches to the left).Flinnster wrote:I got my last few from ArcadeWorld.. https://www.arcadeworlduk.com/categorie ... a/Harness/
They seem OK, but ultimately all this stuff is cheaply imported from somewhere in Asia
I'm left having to connect things direct to the 'gun, of course I can't with the PB because the casing gets in the way!
- Flinnster
- Please Continue...
- Posts: 334
- Joined: September 19th, 2016, 12:06 am
- Location: Surrey
- eBay: flinnster
- Initials: KID
Re: Jamma harness
Yeah, I've doubled up the power wires on a loom now and again, and grounds too. The rest are usually pretty fine though for switches and so on.
For the pandora, have you tried taking the board out of the case? The actual pcb inside is pretty tiny and there's not much that can be accidentally broken on it.
Image to the left I think is a pretty common issue with PB's outputting RGBS on the jamma edge, just need to tweak your monitor pots to fix that I'm afraid.
For the pandora, have you tried taking the board out of the case? The actual pcb inside is pretty tiny and there's not much that can be accidentally broken on it.
Image to the left I think is a pretty common issue with PB's outputting RGBS on the jamma edge, just need to tweak your monitor pots to fix that I'm afraid.
WTD: Rolling Thunder pcb, ANY Dino King / Love & Berry / MushiKing spare parts!!
-
- Please Continue...
- Posts: 14
- Joined: February 25th, 2017, 8:23 pm
- Location: Uk
- eBay: Polygonwindow
Re: Jamma harness
I suppose I could. Save me running the risk of buying another naff cable.