Supergun - JAMMA to NAOMI

Everything Supergun related
Forum rules
ArcadeOtaku forum introduction & rules
NeoRetro
Posts: 12
Joined: January 17th, 2017, 1:36 pm
eBay: Daveretrostuff
Initials: DAV
Location: UK

Supergun - JAMMA to NAOMI

Postby NeoRetro » January 23rd, 2017, 9:22 am

Hi,

Bought my first supergun this weekend and starting to look for pcb's to collect, after finding it somewhat difficult to add to the AES collection.

I found lots of games but a few that work of the Sega Naomi hardware. I notice this operates in a similar way to the Neo geo MVS where it has a cart slot for new games.

I was wondering, what's needed to get the NAOMI to work on a JAMMA harness, or supergun configured to work with a standard JAMMA harness at least. Is this a lot of work? Or just an adapter? Or even impossible?

Appreciate any advice and apologies if it's a stupid question.

Thanks
User avatar
DaveyD
Posts: 118
Joined: December 9th, 2014, 7:14 am
eBay: Dr_Daph
Initials: DPD
Location: Grimsby, UK

Re: Supergun - JAMMA to NAOMI

Postby DaveyD » January 23rd, 2017, 9:37 am

you need something like the capcom or sega IO. jamma plugs in one side, JVS power, vga and audio for naomi plugs in the other side. This will be fine if you are just using cartridges. If you want to run a GDrom or net dimm with it too then you need to power the naomi separately with JVS power supply or modded ATX power supply
NeoRetro
Posts: 12
Joined: January 17th, 2017, 1:36 pm
eBay: Daveretrostuff
Initials: DAV
Location: UK

Re: Supergun - JAMMA to NAOMI

Postby NeoRetro » January 23rd, 2017, 9:50 am

DaveyD wrote:you need something like the capcom or sega IO. jamma plugs in one side, JVS power, vga and audio for naomi plugs in the other side. This will be fine if you are just using cartridges. If you want to run a GDrom or net dimm with it too then you need to power the naomi separately with JVS power supply or modded ATX power supply


Cheers. Are these things fairly easy to get hold of and apply? I'm not a big one for mods.
User avatar
DaveyD
Posts: 118
Joined: December 9th, 2014, 7:14 am
eBay: Dr_Daph
Initials: DPD
Location: Grimsby, UK

Re: Supergun - JAMMA to NAOMI

Postby DaveyD » January 23rd, 2017, 10:59 am

Yes you should be able to get hold of one easy enough. If you are just using a Naomi with original game carts then its a piece of cake to plug together
User avatar
Sumez
Posts: 44
Joined: December 12th, 2016, 8:45 am
Initials: SMZ
Location: Denmark

Re: Supergun - JAMMA to NAOMI

Postby Sumez » January 23rd, 2017, 12:37 pm

What you're looking for is typically just described as a "JVS I/O board". I've heard that some models might add additional lag - but good brands like Sega, Namco, etc. should be fine.
NeoRetro
Posts: 12
Joined: January 17th, 2017, 1:36 pm
eBay: Daveretrostuff
Initials: DAV
Location: UK

Re: Supergun - JAMMA to NAOMI

Postby NeoRetro » January 23rd, 2017, 8:01 pm

Thanks for the replies chaps.

Any recommendation for PCBs worth getting started with? What did you begin your collections with?
User avatar
Paulie
Opens wallet, moths fly out
Posts: 3105
Joined: September 28th, 2011, 5:43 pm
eBay: retro-paulie
Initials: PSG
Location: Batley, West Yorks

Re: Supergun - JAMMA to NAOMI

Postby Paulie » January 24th, 2017, 12:04 am

It'll look something like this when set up
viewtopic.php?t=20528

Return to “SuperGun Q&A”



Who is online

Users browsing this forum: No registered users