Page 1 of 1

Sigma Hakuryu Supergun issue

Posted: January 16th, 2017, 1:00 am
by tony starks
Hi all,

So I finally get a supergun and I have been having display issues.

https://www.flickr.com/photos/10812526@N08/?

At first I thought that the scart cable could be the issue so I tested the cable on a crt and a flat screen and still had an issue.

I decided to get retrogamingcables to have a look at the scart cable and Richard informed me that the cable was fine, so with that being said

the issue must be the supergun itself.

Any suggestions please?

Re: Sigma Hakuryu Supergun issue

Posted: January 16th, 2017, 10:11 am
by Sumez
I'm guessing the issue is your TV. I've had similar issues trying to run arcade hardware on flat panel TVs, where it looks like the green and red colors are switched around.

Try testing your supergun on a CRT before you blame it. :)

Re: Sigma Hakuryu Supergun issue

Posted: January 16th, 2017, 11:03 pm
by tony starks
Sumez wrote:I'm guessing the issue is your TV. I've had similar issues trying to run arcade hardware on flat panel TVs, where it looks like the green and red colors are switched around.

Try testing your supergun on a CRT before you blame it. :)

Hi duder, I already did :P

tony starks wrote:
At first I thought that the scart cable could be the issue so I tested the cable on a crt and a flat screen and still had an issue.
Thanks though, much appreciated :)

Re: Sigma Hakuryu Supergun issue

Posted: February 14th, 2017, 9:17 pm
by tony starks
Well I just found out that the issue is not the supergun but the CPS2 A board :problem: