Sega Boardmaster SOUND missing
-
- Posts: 586
- Joined: February 7th, 2016, 10:51 pm
- Location: Navarra
Sega Boardmaster SOUND missing
Hello my friends
I'm sad because I don't know why it doesn't output sound...
I checked all the 4 fuses and looks fine, jamma harness is ~ 5V always..
Tried in my HDTV and Sony trinitron CRT... And results are the same, sound missing.
Can be something broken inside?
The boardmaster is brand new and I still didn't play on it, I'm still in the first steps...
I can't use the RGB 21 from Japan because I believe to have heard in Internet that they comes with some pin signals changed and doesn't work with Euro SCART TV
Please help,I'm a bit desperate to start enjoying this sexy boardmaster.
- rugdoctor
- Please Continue...
- Posts: 609
- Joined: June 23rd, 2010, 5:45 am
- Location: New Zealand, Wellington
- Initials: KLM
- Contact:
Re: Sega Boardmaster SOUND missing
you need to increase the sound output from your JAMMA board...and superguns should be free from MAME..always
my website: http://kelvinsgamingheaven.blogspot.co.nz/" onclick="window.open(this.href);return false;
-
- Posts: 586
- Joined: February 7th, 2016, 10:51 pm
- Location: Navarra
Re: Sega Boardmaster SOUND missing
rugdoctor wrote:you need to increase the sound output from your JAMMA board...and superguns should be free from MAME..always
Oh God... Really?
How can I do it?
Or is on each test menu of the games?
Sorry to looks like a stupid...
-
- Posts: 586
- Joined: February 7th, 2016, 10:51 pm
- Location: Navarra
Re: Sega Boardmaster SOUND missing
Boardmaster has a sound regulator wheel, but I turn it to each side without success...
- rugdoctor
- Please Continue...
- Posts: 609
- Joined: June 23rd, 2010, 5:45 am
- Location: New Zealand, Wellington
- Initials: KLM
- Contact:
Re: Sega Boardmaster SOUND missing
turn the wheel half way. BUT the cps2 A-Board has 3 side buttons, one of them will increase the sound in both the L/R output as well as the JAMMA sound output. Adjust that until you hear sound.
my website: http://kelvinsgamingheaven.blogspot.co.nz/" onclick="window.open(this.href);return false;
-
- Posts: 586
- Joined: February 7th, 2016, 10:51 pm
- Location: Navarra
Re: Sega Boardmaster SOUND missing
rugdoctor wrote:turn the wheel half way. BUT the cps2 A-Board has 3 side buttons, one of them will increase the sound in both the L/R output as well as the JAMMA sound output. Adjust that until you hear sound.
Ok,I'll try this tomorrow.
But...
What happens with my Puyo Puyo and blood Bros boards? Doesn't have buttons in the motherboard true?
And games doesn't sound as well.... Turning or not the sound wheel.
- rugdoctor
- Please Continue...
- Posts: 609
- Joined: June 23rd, 2010, 5:45 am
- Location: New Zealand, Wellington
- Initials: KLM
- Contact:
Re: Sega Boardmaster SOUND missing
hmm...lets hope the JAMMA board volume is too low in your case.
my website: http://kelvinsgamingheaven.blogspot.co.nz/" onclick="window.open(this.href);return false;
-
- Posts: 586
- Joined: February 7th, 2016, 10:51 pm
- Location: Navarra
Re: Sega Boardmaster SOUND missing
And how can I know it?
How to fix?
I only hope my brand new supergun isn't broken please...I've been waiting it on hold by the customs 1 month!
How to fix?
I only hope my brand new supergun isn't broken please...I've been waiting it on hold by the customs 1 month!
- SuperPang
- Master or universe
- Posts: 11025
- Joined: August 16th, 2008, 2:45 pm
- Location: UK
- eBay: *_*
- Initials: JOE
- Contact:
Re: Sega Boardmaster SOUND missing
I'm sure it's fine. As rugdoctor said, turn the Supergun's amp about half way then adjust the volume on the PCB. There are buttons on the side of CPS2 but most PCBs have a pot (VR1) you can turn with a screwdriver. Also enter the CPS2 test menu and check audio is set to JAMMA and not Q-Sound.
You can probably buy an RGB cable from Videogame Imports or Retro Gaming Cables. You could also use an RGB21-Scart adapter (try ebay). These will probably carry audio too. Your LCD might not always like the video signal so stick to CRT if you can.
You can probably buy an RGB cable from Videogame Imports or Retro Gaming Cables. You could also use an RGB21-Scart adapter (try ebay). These will probably carry audio too. Your LCD might not always like the video signal so stick to CRT if you can.
-
- Posts: 586
- Joined: February 7th, 2016, 10:51 pm
- Location: Navarra
Re: Sega Boardmaster SOUND missing
Just found that in the Jamma harness there's not 12V signal....
I'll change the fuse just in case
I'll change the fuse just in case
-
- Posts: 586
- Joined: February 7th, 2016, 10:51 pm
- Location: Navarra
Re: Sega Boardmaster SOUND missing
Confirmed
+12V fuse and -5V fuse broken
And my CPS1 Final Fight original not working too'
All I guess... Thanks to the RGB 21 Japanese when fitting in to Euro Scart TV
That's probably the reason why my CPS2 motherboard fan was stopped
+12V fuse and -5V fuse broken
And my CPS1 Final Fight original not working too'
All I guess... Thanks to the RGB 21 Japanese when fitting in to Euro Scart TV
That's probably the reason why my CPS2 motherboard fan was stopped
- rugdoctor
- Please Continue...
- Posts: 609
- Joined: June 23rd, 2010, 5:45 am
- Location: New Zealand, Wellington
- Initials: KLM
- Contact:
Re: Sega Boardmaster SOUND missing
ffs....Label the JAMMA harness properly to make sure you do not put the JAMMA board in backwards while you are at it.
May Easter be a celebration of Christ and your sg..ffs....
my website: http://kelvinsgamingheaven.blogspot.co.nz/" onclick="window.open(this.href);return false;
- FrancoB
- J+ member of the year finalist!
- Posts: 4758
- Joined: June 8th, 2009, 10:42 pm
- Location: Oxfordshire
- eBay: francosquashking
- Initials: FRN
Re: Sega Boardmaster SOUND missing
The lack of 12v will be why you have no sound.
I would open the SG up and meter the PSU without a game board attached and then go from there.
I would open the SG up and meter the PSU without a game board attached and then go from there.
- NGAES
- Posts: 144
- Joined: August 28th, 2008, 5:40 pm
- Location: Stockholm, Sweden
Re: Sega Boardmaster SOUND missing
Get a proper Scart for this Gun at Retrogamingcables UK. Got one for my Sigma and it's really .
-
- Posts: 586
- Joined: February 7th, 2016, 10:51 pm
- Location: Navarra
Re: Sega Boardmaster SOUND missing
It's working!
Replaced both, 12V and -5V fuses and problem solved!
What RGB cable do I need to buy in retro gaming cables UK?
Is the original RGB 21 Japanese cable useless for me?
Replaced both, 12V and -5V fuses and problem solved!
What RGB cable do I need to buy in retro gaming cables UK?
Is the original RGB 21 Japanese cable useless for me?
-
- Posts: 586
- Joined: February 7th, 2016, 10:51 pm
- Location: Navarra
Re: Sega Boardmaster SOUND missing
BIG THANKS!
-
- Please Continue...
- Posts: 6
- Joined: January 5th, 2012, 12:56 am
- Location:
Re: Sega Boardmaster SOUND missing
Where do I buy fuses (and which ones) for the boardmaster of I'm in the states. I have the same problem. No sound and cps2 fan doesn't spin. I'm terrible at these things. Thanks for any help!
Enter the Tekken.