I'm building a new Supergun, like the title says I was aiming for a all in one solution.
Since I had a spare ATX PSU and some parts that we're needed to build it, I gave it a try.
This is, so far, the supergun or mak or you name it:
Sorry for the poor picture quality.
Jamma and Neo Geo is already working fine.
Now I wanted to make sure that I got the right pinouts for the Naomi Power connection
I found this here
Please tell me if my guess is right:
CN1=
1. NC
2.3,3V
3.5v
4.12v
rest GND
CN2=
1.NC
2.3,3V
3.5V
rest GND
GD ROM
1+2 =12V
3+4 = 5V
5+6= GND
Am I correct with this?
About Kick harness I was thinking of just adding 3 Kicks + GND wires to the spare connections on the D-Sub 15 (Neo Geo Plug) connectors, and screw them up on a small terminal, to have a flexible connection with all the Kickharness plugs there are, or add a Male 8 Pin JST connector, so I could use my Blast City Plugs.
edit:
Maybe somebody can provide me with the partnumers, or even better with some parts to do that.
Is there anything I forgot about?