Search found 10 matches

by PappaLazarou
April 2nd, 2017, 3:23 pm
Forum: Monitor Q&A
Topic: Polo/2 28" B+
Replies: 4
Views: 100

Re: Polo/2 28" B+

Awesome Thankyou. I've got the videocolor tube so I'm spot on :-)
by PappaLazarou
April 2nd, 2017, 12:46 pm
Forum: Monitor Q&A
Topic: Polo/2 28" B+
Replies: 4
Views: 100

Re: Polo/2 28" B+

Hi Grant, I believe it's fixed 15kHz. Rating label says Polo/2 28.
Theres no VGA connector or 25kHz option fitted etc.
Cheers, Mike.
by PappaLazarou
April 2nd, 2017, 12:00 pm
Forum: Monitor Q&A
Topic: Polo/2 28" B+
Replies: 4
Views: 100

Polo/2 28" B+

Anyone know what correct B+ for Polo/2 should be? Schematic shows a 130V rail but I some forums say 138V or 105V! I've just recapped the chassis and I'm measuring 140V.
Cheers, Mike.
by PappaLazarou
March 29th, 2017, 9:43 pm
Forum: Monitor Q&A
Topic: Nanao MS-2934 MS-2932 Tube compatibility
Replies: 5
Views: 238

Re: Nanao MS-2934 MS-2932 Tube compatibility

Got the MS-2932 chassis and paired it up to MS-2934S Tube and it works. Picture is a bit wobbly and degaus coil not being energized but relay clicking so possibly PTC(?) The chassis looks like its been stored near a beach the amount of corrosion on the jumper wires! Going to give it a good clean on ...
by PappaLazarou
March 24th, 2017, 11:58 pm
Forum: Monitor Q&A
Topic: Hantarex Polo/2 28" Cap List
Replies: 0
Views: 51

Hantarex Polo/2 28" Cap List

Hi has anyone got an official list for the Polo 2?
I can find loads on standard Polos but the circuit references dont tie up with the Polo 2.
If not I'll record them as I take them off and re-post.
Cheers,
Mike.
by PappaLazarou
March 24th, 2017, 10:51 pm
Forum: Game Hardware Q&A
Topic: POLL: What are the hardware failures you will remember for your whole life?
Replies: 17
Views: 876

Re: POLL: What are the hardware failures you will remember for your whole life?

I plugged 110Vac into the degauss switch input on a Nanao chassis so basically 110Vac into the secondary side! Vaporized the some of the surface mount components around the degauss relay circuit :lol:
by PappaLazarou
March 18th, 2017, 6:17 pm
Forum: Monitor Q&A
Topic: Nanao MS-2934 MS-2932 Tube compatibility
Replies: 5
Views: 238

Re: Nanao MS-2934 MS-2932 Tube compatibility

Ah that explains the part different Toshiba tube numbers.
Sounds like I'll be good pairing the MS-2932 to my semi-flat tube then :D
Cheers guys,
Mike.
by PappaLazarou
March 18th, 2017, 8:58 am
Forum: Monitor Q&A
Topic: Nanao MS-2934 MS-2932 Tube compatibility
Replies: 5
Views: 238

Re: Nanao MS-2934 MS-2932 Tube compatibility

Cheers Grant, I know they're both 31kHz chassis but I wasn't sure if the slightly different toshiba tube p/n made a difference. Will give it a try when chassis arrives.
Thanks, Mike.
by PappaLazarou
March 17th, 2017, 10:20 pm
Forum: Monitor Q&A
Topic: Nanao MS-2934 MS-2932 Tube compatibility
Replies: 5
Views: 238

Nanao MS-2934 MS-2932 Tube compatibility

Hi All,

I've got a Nanao MS-2934 with a Toshiba A68KSM696X tube. The mainboard appears fried - . I'm waiting on delivery of a MS-2932 main-board and neck-board I bought online (impulse purchase) and now I'm wondering if it's compatible - anyone know? Are the Dx/Dy specs the same?

Cheers,
Mike.
by PappaLazarou
March 17th, 2017, 4:16 pm
Forum: Insert Coin
Topic: Introduce yourself here!
Replies: 3577
Views: 210707

Re: Introduce yourself here!

Hi All,
Mike from South Wales!
Couple of Cabs and Cocktail cabinet to restore :-)
Currently re-capping 2 Hantarex Polo 28" and a hopefully a Nanao MS-2934

Go to advanced search